The picture
-
Figure 1 shows the box before the last side is added and excess material
removed.
(The fan will be inserted from behind and rest against the ends of
the small corner pieces)
-
Figure 2 shows the top of the box as seen from below.
Materials
-
4 mm birch plywood.
-
Corner pieces from spruce.
-
The box is dimensioned for a 80 x 80 x 25 mm axial fan.
-
Check that the fan rotates as shown on the picture. If not make a mirror
image of the box.
Procedure
-
Make the two top pieces as shown on figure 2. Glue them together.
-
Make and glue together the rest of the box.
-
Cut and sand away all excess edges
|
