WanCrypt
Using WanCrypt in a Lan is easy but in Wan and Internet there are some challenges.
If you are using ordinary Modem or ISDN check your local
IP in the menue of TeleMorse.
This the ip address your friend is using as his target ip address.
If you are behind a fire wall or router you must tell you router/firewall
to forward all data
coming to port 1001 (default port on TeleMorse). To your PC local ip address.
If your local IP address is 192.168.1.60 the tell your firewall to forward
the IP address to
this address. If you are sending messages to another PC on the Internet.
The target address is this PC Internet address (not his local ip address).
If you don't know your Internet address than go to a web page that displays
this address.
Like ip-adress.com.